Professional Paver Sealing in Mission, BC
Request A Quote
Paver Sealing in Mission BC
Preserve and Beautify Your Pavers With Expert Sealing Services
Unsealed pavers don’t stay beautiful for long in this wet weather. Before you know it, you could end up with heavily stained, moss-covered surfaces.
Blue Jay ProWash has some good news! You can keep your pavers pristine year in and year out thanks to the superior protection our Trident commercial-grade sealers provide.
Calling Blue Jay ProWash for expert paver sealing in Mission, BC will help you:
- Extend your pavers’ lifespan by preventing erosion, stains, and UV damage
- Boost moss and weed prevention through joint stabilization
- Enhance water repellency
- Create a protective barrier against oil spills and Mission’s freeze-thaw cycles
- Enhance curb appeal with a vibrant polished finish
Why Choose Blue Jay ProWash for Paver Sealing?
Leave all your paver sealing needs to a team of skilled pros you can trust.
Why settle for a low-quality hardware store product? Instead, enjoy the lasting durability of our commercial-grade Trident sealers. We even offer five to ten-year durability warranties for your peace of mind.
For maximum durability and moisture resistance, we apply two coats of sealant, allowing 60-90 minutes of drying time in between.
Our low-VOC, water-based sealers are safe for your pets, plants, and children.
Enjoy the peace of mind that comes with our five-year product warranty. After we finish, we’ll give you post-service care instructions and ongoing maintenance support.
High-Quality Commercial-Grade Sealers
Why settle for a low-quality hardware store product? Instead, enjoy the lasting durability of our commercial-grade Trident sealers. We even offer five to ten-year durability warranties for your peace of mind.
Specialized Two-Coat Sealing Process
For maximum durability and moisture resistance, we apply two coats of sealant, allowing 60-90 minutes of drying time in between.
Eco-Friendly and Safe for Landscaping
Our low-VOC, water-based sealers are safe for your pets, plants, and children.
Satisfaction Guarantee and Warranty Protection
Enjoy the peace of mind that comes with our five-year product warranty. After we finish, we’ll give you post-service care instructions and ongoing maintenance support.
Transparent Pricing and Cost Breakdown
Paver Sealing Pricing Breakdown
How much you spend on paver sealing will depend on square footage, surface condition, accessibility and sealer type.
For example, since a heavily stained surface needs extra cleaning, the cost to seal it will be higher. Also, old sealer stripping adds 25-40% to the final price. Joint sand replenishing adds an extra $0.75 to $1.50 per square foot.
You will also spend more on wet-look and color-enhancing sealers than our water-based options. With all these factors in mind, here’s a breakdown of our pricing model:
Special Offers and Discounts
Take advantage of our special discounts. Repeat customers who book within five years get a 5% discount and bundling your paver sealing with driveway pressure washing could save you $250!
What Types of Pavers Can We Seal?
Brick Pavers
We offer expert brick paver sealing in Mission, BC, providing superior protection for your driveway, patio or walkway surfaces. We’ll first deep-clean the surfaces with a high-pressure cleaner before applying Trident joint stabilizing sand. Afterwards, we’ll seal the surface with a premium, UV-resistant sealer.
Concrete Pavers
We also cater to concrete pavers, ensuring deep penetration and lasting durability through our two-coat sealing process. We even use low-pressure cleaning beforehand to guarantee a damage free finish.
Try Mission's Best Paver Sealing Today
We Guarantee 100% Satisfaction on All Services
Here’s how we’ll seal your pavers
Our Proven Paver Sealing Process
1
Surface Cleaning and Sealer Stripping (If Needed)
First, we’ll start with high-powered paver washing to remove dirt, algae and other build-up. If necessary, we’ll use a Trident Strip-It solution to remove the old sealer. We normally give the solution 20-30 minutes of dwell time to ensure effective removal.
2
Joint Sand Restoration
We’ll then stabilize your pavers by applying polymeric or kiln-dried sand. The compacting and levelling process that follows will ensure even coverage.
3
Sealer Application
We use a two-coat application to guarantee high-quality results: We’ll start by applying the first coat, ensuring deep penetration for maximum adhesion We will give the first coat 60-90 minutes to dry properly We’ll then apply a second coat, providing extra durability and water resistance
4
Customer Walkthrough and Post-Service Care
The process ends with a final walkthrough to confirm your satisfaction. Afterwards, we’ll leave you with a few post-care instructions and traffic restrictions. For instance, we recommend waiting 24 hours before walking on your pavers and 48 hours before driving on them.
What Our Happy Clients Are Saying!
Guarantees, Warranties, and Satisfaction Policies
Whenever you call us for paver sealing in Mission, BC, you can rest easy knowing the service will come with a five-year product warranty and a 100% satisfaction guarantee. We ensure you are completely happy with the results before invoicing you.
Get a Free Quote for Paver Sealing in Mission, BC!
Don’t let your stunning pavers fall to ruin just because of wet weather or heavy foot traffic. Ensure long-lasting durability and superior color enhancement by scheduling professional, high-quality paver sealing in Mission, BC.
Get in touch with Blue Jay ProWash today at (604) 214-5004 to request your free estimate!
Frequently Asked Questions
Below, we’ve answered some of the most common questions we receive regarding paver sealing.
How Long Does the Sealing Process Take?
How long the process takes will vary depending on the area’s size and condition. For instance, sealing a standard driveway (600 sq. ft.) will take six to eight hours. Larger, more extensive sealing projects might need one to two days.
Will Sealing Make My Pavers Slippery?
No. However, we can offer anti-slip additives for commonly wet areas like pool decks.
How Long Does the Sealer Last?
Typically the sealer will last five to ten years depending on traffic, the climate, and maintenance.
What Should I Do To Prepare for Sealing?
To prepare for sealing, we recommend moving furniture, planters and vehicles off the area at least 24 hours before the service.
Ready To Revitalize Your Pavers?
